Finish smart to assure a tight building envelope.
Before the windows and siding are installed, it’s important to assure a tight seal around your entire home. This is done by taping cracks and seams and installing flashing around rough openings. TYPAR offers all the accessories needed as part of the complete TYPAR Weather Protection System.
TYPAR Flashing AT
As part of the TYPAR Weather Protection System, Flashing AT provides protection against moisture penetration at windows, doors, and thru-wall entry points. Count on maximum adhesion to OSB, plywood, aluminum, vinyl and the weather resistive barrier - even in extreme temperature conditions. Suitable for installation in temperatures as low as 0oF, TYPAR Flashing AT is stable up to 180oF and capable of adhering to wet surfaces. No VOC, NFCC or CFC and exceeds current AAMA 711 standards.
TYPAR Flashing RA
A rubberized asphalt flashing that is an affordable choice with best-in-class performance. Designed for use in the TYPAR Weather Protection System, which is backed by a 10-year limited installed warranty/lifetime limited product warranty (for single-family residents only).
Many commonly used sealants and caulks contain solvents and plasticizers which can react with the rubberized asphalt adhesive on flashing system. Make sure caulks or sealants coming in contact with the adhesive portion of TYPAR Flashing RA do not contain plasticizers or solvent. This includes most polyurethane and silicone caulks.
TYPAR Flashing Flex
A conformable, composite peel and stick flashing product, ideal to flash around curved windows. Use it on window flanges, sill plates, corners and joints to improve air and moisture holdout. Based on a two-ply oriented high density polyethylene film, mated to a premium butyl rubber adhesive and release sheet.
TYPAR Construction Tape
A strong, coated polypropylene film that seals seams and edges to ensure the integrity of the building envelope. Use it on window flanges, corners, joints and seams to improve the building envelope and air and moisture holdout. Won’t deteriorate over time providing years of reliable performance.
Flashings & Tapes - Typical Characteristics
|TYPAR Flashing AT|
|Roll sizes||4” x 75 ft
6” x 75 ft
9” x 75 ft
|90 Peel Adhesion||(per AAMA 711-07)||Block Copolymer|
|- Plywood||5.0 lb/in|
|- OSB||3.8 lb/in|
|- Facer||4.6 lb/in|
|Mold Growth||(per ASTM G-21)||No Growth|
|Application Temp||0o to 180oF|
|Nail Sealability||(per AAMA 711-07)||Pass|
|UV Stability||6 months|
|TYPAR Flashing Flex|
|Roll sizes||6” x 75 ft
9” x 75 ft
|Recommended Exposure Limit||90 Days|
|Low Temperature Flexibility||(per ASTM D_903)||Pass|
|Nail Sealability||(per ASTM D_1970)||Pass|
|Tensile Strength||(per ASTM D_2523)||Pass|
|TYPAR Construction Tape|
|Roll sizes||17/8” x 55 yards
16 rolls per carton
TYPAR – 35 oz/in
Stainless Steel – 75 oz/in
|Tensile Strength||(PSTC-31)||20 lbs/in|
|Temperature Resistance:||00 F (-180C) – Min Application Temperature
2300 F (1100C) – Max use Temperature
|* Pressure Sensitive Tape Council|
The information contained herein is to the best of our knowledge accurate and reliable and is provided for the user’s assessment and verification. However, since the circumstances and conditions under which such information and the products discussed can be used may vary and are beyond our control, we make no warranty, expressed or implied, of merchantability, fitness or otherwise, or of the results to be obtained, or against patent infringement, and we disclaim all liability from any resulting damage or loss.
- TYPAR Flashing RA Typical Characteristics
- TYPAR Flashing Flex Typical Characteristics
- TYPAR Construction Tape Typical Characteristics
- TYPAR Flashing RA 3 - Part Specification
- TYPAR Flashing RA MSDS
- TYPAR Flashing Flex 3 - Part Specification
- TYPAR Flashing Flex MSDS
- TYPAR Construction Tape 3 - Part Specification
- TYPAR Construction Tape MSDS
- TYPAR Flashing AT Sell Sheet