Residential | Multi-family | Commercial

FLASHING Panels.

Saving steps, especially on large projects, is a huge key to success. But so is doing the job right. TYPAR® Flashing Panels are a simple, labor-eliminating solution for sealing off wall penetrations with confidence.

ELECTRICAL FLASHING PANELS.

Forget chemical sealants and eliminate extra steps. This surprisingly simple solution installs fast, saves labor, and works with most types of cladding. But it also provides a strong way to stop air leakage and water intrusion around electrical wall penetrations.

PLUMBING FLASHING PANELS.

Our plumbing flashing panels deliver the same installation and performance advantages as our electrical flashing panels. The lineup includes a variety of sizes to meet your needs. And you can install them either before or after the building wrap.

A/C FLASHING PANELS.

Tricky tasks call for specialized solutions. Our selection of time-saving flashing panels also includes easy answers for the challenge of weatherproofing around A/C lines. Plus, the panels can be painted to blend with the home’s exterior.

Flashing Panel Specs

ELECTRICAL FLASHING PANEL-001

APPLICATION
  • Fits low voltage rounded wire, coaxial cable (also used with electrical pipes through brick and stone veneers)

PANEL SIZE
11-1/8" x 11-1/8" x 3/32"

Plumbing FLASHING PANEL-001

APPLICATION
  • Fits 1/8″ to 3/8″ copper, rigid or PVC pipes (can also be used for electrical conduit)

PANEL SIZE
11-1/8" x 11-1/8" x 3/32"

Plumbing FLASHING PANEL-002

APPLICATION
  • Fits 1/2″ to 3/4″ copper, rigid or PVC pipes (can also be used for electrical conduit)

PANEL SIZE
11-1/8" x 11-1/8" x 3/32"

Plumbing FLASHING PANEL-003

APPLICATION
  • Fits 1″ to 1-1/4″ copper, rigid or PVC pipes (can also be used for electrical conduit)

PANEL SIZE
11-1/8" x 11-1/8" x 3/32"

Plumbing FLASHING PANEL-004

APPLICATION
  • Fits 1-1/2″ to 1-3/4″ copper, rigid, PVC or ABS pipes (can also be used for electrical conduit)

PANEL SIZE
11-1/8" x 11-1/8" x 3/32"

Plumbing FLASHING PANEL-005

APPLICATION
  • Fits 2″ to 2-1/2″ copper, rigid, PVC or ABS pipes (can also be used for electrical conduit)
  • Also fits 3″ single wall sheet metal duct

PANEL SIZE
11-1/8" x 11-1/8" x 3/32"

Plumbing FLASHING PANEL-006

APPLICATION
  • Fits 3″ copper, rigid, PVC or ABS pipes
  • Also fits 4″ single wall sheet metal duct

PANEL SIZE
11-1/8" x 11-1/8" x 3/32"

Plumbing FLASHING PANEL-007

APPLICATION
  • Fits 4″ copper, rigid, PVC or ABS pipes
  • Also fits 4″ or 5″ single wall sheet metal duct

PANEL SIZE
12-1/2" x 12-1/2" x 3/32"

Plumbing FLASHING PANEL-008

APPLICATION
  • Fits 6″ copper, rigid, PVC or ABS pipes
  • Also fits 6″ single wall sheet metal duct

PANEL SIZE
12-1/2" x 12-1/2" x 3/32"

A/C FLASHING PANEL-009

APPLICATION
  • A/C line set curved flashing panel
  • Paintable to match exterior*
  • Use on 1-coat stucco, 3-coat stucco, and siding exteriors
  • Fits line sets with 1-1/2″ to 2-3/4″ insulation tubing

PANEL SIZE
16” x 18”

Find Flashing Panels near you.